Avid Power ACSW212, Operator'S Manual

Page: 5 / 16

4
When servicing a tool, use only identical replacement parts. Follow instructions in
the maintenance section of the manual. Use of unauthorized parts or failure to follow
maintenance instructions may create a risk of electric shock or injury.
7. HOLD TOOL BY INSULATED GRIPPING SURFACES WHEN PERFORMING AN
OPERATION WHERE THE CUTTING TOOL MAY CONTACT HIDDEN WIRING OR ITS
OWN CORD. CONTACT WITH A “LIVE” WIRE WILL MAKE EXPOSED METAL PARTS
OF THE TOOL “LIVE” AND SHOCK THE OPERATOR.
8.ENSURE THE EXTENSION CORD YOU USE IS OF SUFFICIENT GAUGE FOR ITS
LENGTH.
Amps from Tool
Nameplate Recommended Minimum Wire Gauge for Extension Cords
5.1-8 amps
8.1-12 amps
12.1-15 amps
16 ga. 16 ga. 16 ga. 14 ga. 12 ga. 12 ga.
9. STAY ALERT.
tired.
DANGER! Keep hands away from cutting area and blade. Keep your second hand on
cut by the blade. Keep your body positioned to either side of the saw blade, but not
in line with the saw blade. Kickback could cause the saw to jump backwards. (See
Kickback.) Do not reach underneath the work. The guard can not protect you from the
blade below the work.
Check lower guard for proper closing before each use. Do not operate saw if lower
guard does not move freely and close instantly. Never clamp or tie the lower guard
the power to the saw disconnected, raise the lower guard with the Retracting Handle
and make sure it moves freely and does not touch the blade or any other part, in all
SAFETY PRECAUTIONS FOR CIRCULAR SAW
IMPORTANT SAFETY INSTRUCTIONS