13
Step 3:
Carefully center the driver bit/drill bit between the jaws.
Step 4:
Move the forward/reverse button to the left side, it will do forward
rotation.
Step 5:
Hold the keyless chuck with one hand and squeeze the trigger slowly
until it is locked in place.
Do it in reverse to remove the driver bit/drill bit.
NOTE:
This drill is compatible with the accessories of other brands. However,
since the drill chuck is 3/8 inch, the diameter of drill bits/driver bits you
purchase cannot exceed 3/8 inch.
REVERSING SWITCH (Fig.8)
1. The reversing switch determines the rotational direction of the tool and also
ADJUSTMENT
Close
Fig.7
Open
Summary of Contents for ACD306-N
Page 20: ...19 SCHEMATIC DRAWING ...
Page 21: ...20 ...