MX4660
Setup Guide
Version 2022Q1.1
© 2022 Avid CNC
All Rights Reserved
If you choose to house your MX4660 in an enclosure, the included strain relief can be used to a x the SP/THC cable to
your control unit. Simply install it in any unused hole of appropriate size in your enclosure.
The left (as shown) threaded end of the strain relief should be installed into the gland plate of the control unit, from the
exterior. The clamping collar (at left in photo) should then be threaded onto the strain relief, from the interior, to hold it in
place on the gland plate.
