Plug and Play
Retrofit Guide
Version 2021Q1.1
© 2021 Avid CNC
All Rights Reserved
Then, install the Orange and Green quick disconnects on the 3
rd
relay of the red break out board mounted to the gland plate
(furthest on the left when facing down into the control unit, closest to the relay sockets on the gland plate). Note, you may
have to crimp down on the QDC's to create a solid connection.
Your CRP800 Control Unit is now ready to connect to the VFD via the grey 14 pin cable included with your Spindle and VFD
package.
