Edition 1 21 Aug 2014
Change no.:
Document no.: TERCEL-AFM-001-EN
Page
TERCEL
PILOT OPERATING HANDBOOK
Chapter 4
Normal procedures
places) and remove the rotor from the head.
·
•
Unscrew the nuts, withdraw the M8x65 bolts (10 pieces) and
remove the blades from the sockets in the hub.
·
•
Piece together and assemble back the hub, sockets, M8×65
bolts, washers and nuts.
·
•
Place the pin (teeter bolt) in the hub with washers, screw on
a nut and pass through the cotter pin (safety pin).
The removed blades, for storage or transportation, must be appropriately
fastened and protected against damage.
34