Installation
Unpacking
The AVI ADM9RS are supplied in pairs.
The left loudspeaker in the “master”, and the right loudspeaker is the “slave”.
Included in the box are the following accessories:
1 x Remote control
2 x mains leads
This instruction manual
Positioning
Your AVI ADM9RS will sound best on solid stands – typically 60cm in height – which
places the tweeter at about ear level. AVI’s online shop offers suitable stands with
holes for cable concealment. If this is not possible then you may alternatively place
them on wall brackets or shelving.
Take care to avoid room boundaries when positioning.
“Running-in”
Unlike some manufacturers who insist on leaving equipment on 24/7 and
“running-in” for hundreds of hours before it sounds at its best, AVI believe that
your equipment will sound great from the start. However, your ears may need a
short while to become to adjust to the sound if it is different from what you are
used to.
Connecting the system
Important warning Under no circumstances should any connections be made
when any part of the system is turned on or even plugged into the mains.
Make sure all connections are made correctly, as outlined in this instruction manual,
and then plug in the mains lead and switch on.