background image

Instruction Manual

Operation Instruction:

Important Safety Instructions:

17. Overloading - Do not overload wall outlets, extension cords, or integral convenience receptacles as this can result in a risk of fire or electric shock.
18. Object and Liquid Entry - Never push objects of any kind into this product through openings as they may touch dangerous voltage points or 

short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product.
19. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other 

hazards. Refer all servicing to qualified service personnel.
20. Damage Requires Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following 

conditions:

a. When the power-supply cord or plug is damaged,
b. If liquid has been spilled, or objects have fallen into the product,
c. If the product has been exposed to rain or water,
d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating 
instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician 
to restore the product to its normal operation,
e. If the product has been dropped or damaged in any way, and
f. When the product exhibits a distinct change in performance - this indicates a need for service.

21. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the 

manufacturer or have the same characteristics as the original part. Unauthorized substitutes may result in fire, electric shock or other hazards.
22. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that 

the product is in proper operating condition.
23. Wall or Pole Mounting - The product should be mounted to a wall or pole only as recommended by the manufacturer.
24. Heat - The product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) 

that produce heat.

NOTE TO CAT5 SYSTEM INSTALLERS:

THIS REMINDER IS PROVIDED TO CALL THE CATV SYSTEM INSTALLER'S ATTENTION TO ARTICLE 820 - 40 OF THE NEC THAT 
PROVIDES GUIDELINES FOR PROPER GROUNDING AND, IN PARTICULAR SPECIFIES THAT THE CABLE GROUND SHALL BE 
CONNECTED TO THE GROUNDING SYSTEM OF THE BUILDING, AS CLOSE TO THE POINT OF CABLE ENTRY AS PRACTICAL.

APR 2013 

 

 

 

 

 

 

 

 

 

 

                 PAGE 5 of 5

ANI-9005

OMNI-DIRECTIONAL WITH AMPLIFIER

DIGITAL INDOOR/OUTDOOR TV ANTENNA

Note: 

For the best reception, please check the following conditions:

1. Keep the antenna away from the sources of interference; such as big power consumption 

devices, like air conditioners, elevators, hair dryers and microwave ovens, etc.

2. Place the antenna near windows when using the antenna in an indoor environment.

3. Install the antenna as high as possible; in digital terrestrial reception,if there are some 

obstructions between antenna and transmission tower, it will cause a temporary signal loss.

360 OMNI DIRECTION TV SIGNAL reception

O  

Summary of Contents for ANI-9005






Reviews: