TMX44PRO AVK
8.1.2 Control the Matrix Switcher Remotely
To control the matrix switcher from remote location, please connect one or more
PCs to the
RS232
ports of HDBaseT receivers with the
3-pin to DB9 RS232
Cables
. The matrix switcher can be controlled by any one of PCs, the connection
diagram is shown below:
Note:
The command “RS232RCM[XX]ON.” ([XX]=00~04) needs to be sent to
enable or disable this control mode. For example, send the command
“RS232RCM00ON.” to enable the remote-control mode for all HDBaseT outputs, and
send the command “RS232RCM00OFF.” to disable the remote-control mode for all
HDBaseT outputs. Please refer to the
8.3.1 System Control
for more details.
AUDIO MATRIX OUT / ARC
IR EYE
Tx
Rx
LINK
HDCP
PC
Display
Receiver
Tx
Rx
LINK
HDCP
PC
Display
Receiver
4K Blu-Ray
HDMI:
RS232:
HDBaseT:
