MHD4K-44
7.2.7 EDID Management
Command
Function
Feedback Example
EDIDMInit.
Restore the factory default EDID data
for each input.
All Input EDID Set
Default!
EDIDUpgrade[xx].
Upgrade EDID via Serial Port
⚫
[xx]=00~04
xx=01~04 is the number of input
port(able EDID user-defined for
corresponding HDMI input), if the
xx=00, it means all input ports(able
EDID user-defined for all HDMI
inputs).
Note:
EDID user-defined can be used
once, if switch to another EDID or
exit, it will not be saved.
⚫
[xx]=U.
xx=U means user-defined for built-in
EDID(It can be saved in machine for
using at any time).
Note:
It can user-defined only one
built-in EDID, after finishing it,
machine still use previous built-in
EDID.
⚫
When received commands,
machine will remind EDID file
(.bin) to send within 10 seconds.
Input XX/User Define
EDID Upgrade OK By
RS232 Or GUI!
EDID/[xx]/[yy].
Input ports xx use built-in EDID yy
[xx]=00~04
xx=01~04 is the number of the input
port, if the xx=00, it means all input
ports.
[yy]=01~09
yy=01~08, it means built-in EDID that
can not be user-defined, if the yy=09,
it means user-defined EDID.
Input 03 EDID Upgrade
OK By 01 Internal
EDID!
EDIDGOUT[XX].
Read and print EDID of HDMI output,
[XX]=01~04 is the number of the
output port.
EDIDOUT04:
……
EDIDM[xx]B[yy].
Input port [yy] follows the EDID from
Input 01 EDID Upgrade
