AVG-HD320
3. Product Appearance of the AVG-HD320
Transmitter
Receiver
No.
Name
Description
①
RS232 MODE switch
CTRL: RS232 pass-through control mode.
UPDATE A: Update Valens IC program, connect a PC to
the RS232 port, and then double-click the update file
(.bat).
UPDATE B: Update compression IC program, the upgrade
method is the same as the above UPDATE A.
②
Power LED
RED: DC power is present.
③
HDMI IN (Transmitter) Connect a HDMI source.
HDMI OUT(Receiver)
Connect a HDMI display.
④
RS232 connectors
If one is connected with control device (e.g. PC), then the
other end should be connected with the third-party device that
you want to control.
⑤
IR IN
Connect an IR Receiver to transmit the IR signal to the far-end
device.
⑥
IR OUT
Connect an IR Emitter to transmit the IR signal from the far-
end device, to control the local device.
⑦
HDBT
OUT(Transmitter)
Connect to the HDBT IN socket on Receiver via CAT5e/6a
cable.
HDBT IN (Receiver)
Connect to the HDBT OUT socket on Transmitter CAT5e/6a
cable.
⑧
DC 12V power ports
Supports bi-directional PoC, only one of the ports needs to be
connected with the DC12V 2A power adaptor.
Note:
Pictures shown in this manual are only for reference.
CTRL
UPDATE B
UPDATE A
Tx
Rx
DC 12V
IR OUT
IR IN
HDBT OUT
HDMI IN
1
2
3
4
5
6
7
8
CTRL
UPDATE B
UPDATE A
DC 12V
Tx
Rx
HDMI OUT
HDBT IN
IR OUT
IR IN
1
2
3
4
5
6
7
8
