AVG-CS4K-88-V2
HD video, Audio and PoC to the HDBaseT Receiver up
to 70m
1 x HDMI output:
Connect an HDMI cable from the
Matrix Switcher to the display
③
IR IN
7 x IR IN
: Connect a 5V IR receiver, fixed IR input for
the output, cannot be switched separately. It makes up
an IR bi-directional TX path with the IR OUT on the
corresponding HDBaseT receiver.
1 x IR CONTROL
: Connect an extended 5V IR
receiver, use the IR remote to control the Matrix
Switcher
④
IR OUT
7 x IR OUT:
Plug in the 5V IR Emitter and attach to the
front of the Source. This then emits the IR signal
received from the HDBaseT Receiver. There are 7 IR
OUTPUT sockets marked on the IR matrix.
1 x IR ALL OUT
: Plug in a 5V IR emitter to deliver the
IR signal to control the input source device from any of
the far-end receivers.
⑤
Control
RS232:
Serial port for unit control via a phoenix plug
that connects to a control device (e.g. Control
processor)
TCP/IP:
RJ45 port. Connect with a PC or Tablet for
Web-based GUI control.
⑥
Audio outputs
SPDIF:
Digital audio output connects directly via an
optic fibre cable to the Toslink input on a sound bar.
RCA(L+R):
PCM Analogue audio output sockets.
⑦
Power
AC 100V-240V. Connect using an IEC power lead.
Note:
Pictures shown in this manual are for reference only.
