AVG-CS4K-44
Controlling a Far-end Device from the Matrix location
Note: The IR receiver connected to
IR IN
must contain an IR carrier
5.1.5 Controlling a Local Device Remotely
Connect IR receiver(s) to IR IN on the far-end HDBT receiver(s), and IR Emitter(s) to
IR OUT port of the switcher, and use the IR Remote of local source to control the
device remotely.
1 to 1:
Connect an IR receiver to IR IN on far-end HDBT receiver, and an IR Emitter to IR
OUT port of the switcher. Use the IR Remote of local source to control the device
remotely. See below:
Controlling a Local Device remotely
