AVG EZTouch I/O Jr., Manual

Page: 30 / 52

EZTouch I/O
Jr.
30 / 52
Transfer a Project
After a project is complete, the next step is to transfer the project to the
EZTouch I/O
Jr. When editing projects online, programming information is automatically sent to
the
EZTouch I/O
Jr. unit once the project is saved. When editing in an off-line mode,
the project information will need to be transferred. More details about the
transfer process is available in our EZ
Touch Editor
Software Manual and the EZ PLC
Software Manual . The basic instructions are as follows:
From the Project drop down menu, select File > Transfer to Panel . A dialog
box similar to the one below will appear.
There are two connections available to transfer the program.
Serial Port (COM1):
1.
Verify the RS-232C cable ( P/N: EZ-PGMCBL ) is connected between the
unit and the PC. In the absence of an RS-232 port on the PC, a USB to
RS-232 converter may be used to connect the programming cable to the
PC.
2.
Select Serial (COM1) as method of transfer. And then click Start .