AVG EZTouch I/O Jr., Manual

Page: 15 / 52

EZTouch I/O
Jr.
15 / 52
Communication and Cables
Serial Port (COM1)
The
EZTouch I/O
Jr. model has a built-in serial port (COM1 PORT) located on the 9-
pin D-Sub connector. COM1 PORT is an RS-232 port which requires an
appropriate RS-232C cable ( P/N: EZ-PGMCBL ) for programming the
EZTouch I/O
Jr.
through a PC. It serves as the default programming port on the
EZTouch I/O
Jr.
Since COM1 has fixed communication parameters, you can always connect the
programming software to the
EZTouch I/O
Jr. through the port without needing to
make different configuration changes.
Ethernet Port (Optional)
There is also an optional Ethernet port available on select models for the
EZTouch I/O
Jr. This port enables users to add/update programming through an
Ethernet connection.
Note: Before the Ethernet port can be used for programming, the IP Address
listed on the
EZTouch I/O
Jr. unit may require editing. To edit the IP Address,
please consult the Editing IP Address section .