MAINTENANCE (continued)
REPLACING THE LED LIGHT BULBS
CAUTION
:
LED lamps can only be replaced with a new LED lamp. The lamp rating must be equal to the one
already used. Make sure all the control switches are off and the hood is unplugged or the breaker is OFF.
Please follow these instructions:
1.
Make sure the lights are cool to touch, carefully align the arrow on the inner ring with the arrow on
the outer ring where it says OPEN, using the Inner Ring Opener as shown in Figure 1.
2.
The inner ring will loosen and the light bulb can be removed, as shown in Figures 2 & 3.
3.
Install a new bulb and reverse the steps.
4.
Plug in the hood or turn the breaker ON and test the hood for operation
.
SERVICE AND WARRANTY
We warrant our hood against defects in materials and workmanship under ordinary residential use for one
year from the date of original retail purchase. This limited warranty applies to any repair and /or
replacement parts.
This limited warranty is not subject to improper installation, accident, misuse, neglect, fire or other external
causes, alterations, repair or commercial use.
You can contact our After Sales/Service Department from:
Monday through Friday, 8h30 to 16h30 (Eastern STD Time)
AGI SERVICE
Tel: 450.963.1303
Toll free: 1.888.651.2534
Fax: 450.963.8985
Web/E-mail:
www.agiservice.ca
/
customer
@
agintl.qc.ca
26
Figure 1
Figure
2
Figure 3
Align the arrows with the
rings
.
