116
AVG 8.5 File Server © 2009 Copyright AVG Technologies CZ, s.r.o. All rights reserved.
Control buttons of the Settings for scheduled scan dialog
There are two control buttons available on all three tabs of the Settings for
scheduled scan dialog (Schedule settings,
How to scan
and
What to scan
) and
these have the same functionality no matter on which tab you currently are:
·
Save - saves all changes you have performed on this tab or on any other tab
of this dialog and switches back to the
AVG scanning interface default dialog
.
Therefore if you wish to configure the test parameters on all tabs, press the
button to save them only after you have specified all your requirements.
·
Cancel - cancels any changes you have performed on this tab or on any other
tab of this dialog and switches back to the
AVG scanning interface default
dialog
.
11.5.2. How to Scan
On the How to scan tab you will find a list of scanning parameters that can be
optionally switched on/off. By default, most parameters are switched on and the
functionality will be applied during scanning. Unless you have a valid reason to
change these settings we recommend to keep to the pre-defined configuration:
·
Automatically heal/remove infection - (switched on, by default): if a virus
is identified during scanning it can be healed automatically if a cure is
available. In case the infected file cannot be healed automatically, or if you
decide to switch off this option, you will be notified upon a virus detection and
will have to decide what to do with the detected infection. The recommended
