WARRANTY INFORMATION
10 YEAR WARRANTY
AVF warrants that the product is free from defects in material and workmanship, as long as the product is
owned by the original consumer purchaser. If, during the stated warranty of this product, it proves to be
defective, AVF will remedy the defect by either repairing or replacing the defective part or, replacing the
entire product. Proof of original purchase is required and should be retained.
AVF reserve the right to substitute replacement products to others of similar value and design (Usually in the
event of discontinued product models).
AVF accept no responsibility for failures / loss which result from misuse, negligence, accident, improper
assembly or installation or other causes beyond AVF’s reasonable control and also excludes and will not pay
any incidental and consequential damages.
INSTALLATION:
This product is sold as a home DIY product and as such, it is the responsibility of the installer
to ensure that the product is correctly installed. AVF accept no responsibility if the product is incorrectly
installed.
This product is intended for indoor use only. Use of this product outdoors could lead to failure and personal
injury.
IF YOU ARE IN ANY DOUBT, CONSULT A QUALIFIED CONTRACTOR.
NOTES
WALLS:
It is the responsibility of the installer to ensure that the wall is of a suitable standard and void of any
services (eg gas, electricity, water etc). AVF accept no responsibility for any damage or loss caused by
installing this product in a sub standard wall.
WALL FIXINGS:
Wall fixings are supplied for wood, brick, solid masonry and also, for some specific
products, fixings are supplied for fixing to plasterboard.
DO
- Retain all packaging in case the bracket needs to be returned.
- When fastening to wood studs, be sure to pre-drill Ø3mm holes into the wood stud.
- When fastening to brick or solid masonry, drill the holes in accordance with the instructions. Always remove
drill dust from the hole before inserting the wall plug.
- Wall plug body must be fully inserted into the wall (ie fully into the brick).
- Lubricate the wall screws with soap to ease installation.
- Check the strength of the installation before fitting the TV.
- Periodically check strength of installation, signs of corrosion, damage or loose components.
DON’T
- Do not set in mortar joints.
- Do not over tighten screws.
TV HANGING
Must be carried out using the manufacturers threaded holes intended for this purpose. All variables of TV
hanging screws are supplied within the product box (Because of the universal nature of this product, expect
to have excess parts left over following your installation).
It is the responsibility of the installer to ensure the correct TV hanging screws are selected. If in doubt consult
the TV manufacturer. AVF accept no responsibility for any damage caused by the use of the incorrect TV
hanging screw or the use of incorrect fixing holes.
!
PLEASE REVIEW ALL NOTES AND PRODUCT INSTRUCTIONS BEFORE
COMMENCING THE INSTALLATION.