Avery Weigh-Tronix ZQ375 Checkweigher, User Instructions

Page: 15 / 94

ZQ375 Checkweigher User Instructions 15
2.2 Front panel
2.2 Front panel
The front panel, shown in Figure 2.2 , consists of the keys and the display.
Figure 2.2 ZQ375 front panel
The function of the keys on the front panel are listed below.
ZQ375
GROSS
NET
TARE
COUNT
PRINT SP1 SP2 SP3 %
PT
oz
g
kg
lb
TARE SELECT ZERO PRINT
UNITS
F1
ESC
OVER TARGET UNDER
ID
Never press a key with anything but your finger. Damage to the overlay may result if
sharp or rough objects are used.
Weigh / Checkweigh mode - In weigh mode the TARE key will work as configured
via the Admin menu.(See the Service manual). In checkweigh mode, the TARE key
does not function and the display will show cAnt .
Menu navigation - Acts as an up arrow key.
Numeric / Tolerance Entry - Increments a value.
Weigh / Checkweigh mode - Press this key to change from weighing mode to
checkweighing mode and vice versa.
Menu navigation - Acts as a Down Arrow key.
Numeric / Tolerance Entry - Decrements a value.
Weigh / Checkweigh mode - Press to perform a print function.
Menu navigation - Functions as the Left Arrow key.
Numeric / Tolerance Entry - Functions as a backspace.
Weigh / Checkweigh mode - Press to zero the weight display.
Menu navigation - Functions as an Enter key to accept displayed choices.
Numeric / Tolerance Entry - Functions as an Enter key.
Weigh / Checkweigh mode - Press UNITS to cycle the displayed unit of measure
through all the available units of measure.
Menu navigation - Functions as the Right Arrow key.
Numeric / Tolerance Entry - Moves the cursor position to the right in the Numeric
Entry Procedure.
TARE
SELECT
PRINT
ZERO
UNITS