22
ZK830 Counting Scale User Instructions
Indicator applications
3.3 General weighing application
This section applies if the General Weighing application is active. Features described
here also apply to the other applications except where noted in those application
instructions.
In General weighing you can do the following:
l
Gross, tare, net weighing
l
Switch between the local BSQ base and a remote BSQ or analog scale, if
installed
l
High resolution weighing, if enabled
l
Percentage weighing, if enabled
l
Weight accumulation, if enabled
l
Use 40 preset tares, if enabled
3.3.1 SELECT key default function
In the General Weighing application you can view the gross, net, tare, net total, gross
total, percent display and high resolution values by repeatedly pressing
SELECT
.
3.3.2 Gross weighing
To perform gross weighing, power up the unit and follow these steps:
1.
Empty the scale and press
ZERO
to zero the display …
0
is displayed and the
center-of-zero
annunciator (
) lights.
2.
Place item to be weighed on the scale …
Weight is displayed.
3.
Repeat steps
3.3.3 Net weighing
Net weighing is available via three types of tare entry if the optional keypad is attached:
Pushbutton tare
When enabled press
TARE
to tare the weight on the scale.
Entered tare
When enabled you can enter a tare value using the optional
keypad. This type of tare is not available if the keypad is absent.
PLU tare
If you have PLUs in memory, the PLU can be recalled and this
activates the associated tare value. If two scales are active, the
PLU can store a tare for each scale separately.
To change unit of measure, press
UNITS
.
