12
PC-220 Counting Scale User’s Manual
Method 2 Using the
PLU
X
hot key
Recalling a PLU Using
the PLU key
Recalling a PLU Using
a PLU
X
hot key
Clearing a PLU
Clearing a PLU Using
a PLU
X
hot key
Individual PLUs can be locked
so changes cannot be made.
See the Service Manual for
instructions.
Short key press = 1 beep
Long key press = 2 beeps
Using the
PLU
X
hot keys
, you can assign a PLU to one of first seven
available memory slots. These are numbered 1-7. Follow these steps to
create and store a PLU using the hot keys:
1. Create a piece weight using any
of the techniques covered in the
section
Using Piece Weights
.
2. Create a tare (if so desired) by
one of the methods covered in
the section
Using Tares
.
3. Long press the
PLU
X
hot key
where you want to store the
PLU. . .
The PLU is created and stored.
You can auto-store a currently active piece weight and/or tare weight by
doing a long press of the
PLU
key. The data will be stored in the first
empty memory slot. The PLU number will be displayed on the top line of
the display if the action was successful.
To recall a PLU from any of the 35
memory slots using the
PLU
key,
Key in the number of the PLU and
short press the PLU key. . .
The PLU information becomes
active and you can begin counting
the items associated with that PLU.
To recall a PLU from any of the first
seven memory slots using a
PLU
X
hot key
, short press the hot
key where the PLU you want is
stored.. . .
The PLU information becomes
active and you can begin counting
the items associated with that PLU.
To clear any PLU, with no weight on
the scale long press the
Clear
key
then key in the PLU number via the
keypad and long press the
PLU
key. . .
The information from that memory
slot is cleared.
To clear any hot key PLU, with no
weight on the scale long press the
Clear
key then long press the
PLU
X
hot key
you want cleared. . .
The information from that memory
slot is cleared.
Method 3 Auto-store PLU
