Avery Weigh-Tronix GSE 460, User Instructions

Page: 5 / 48

60 Series User Instructions 3
1 General information
1.1 About this manual
This manual is divided into chapters by the chapter number and the large text at the top
of a page. Subsections are labeled as shown by the 1 and 1.1 headings shown above.
The names of the chapter and the next subsection level appear at the top of alternating
pages of the manual to remind you of where you are in the manual. The manual name
and page numbers appear at the bottom of the pages.
This User Instruction manual contains basic operating information. Subjects covered
include indicator installation, counting mode, accumulation mode, truck I/O operation,
filling, time and date entry, and troubleshooting.
Subjects such as the setup mode and the macro programming language are beyond
the scope of a user manual. Contact your GSE Distributor for more information.
1.1.1 Text conventions
Keystrokes are shown in brackets e.g. [PRINT] and reflect the case of the key being
described. This applies to the keys on the indicator keypad.
Displayed messages appear in italic type and reflect the case of the displayed
message.
1.1.2 Operator interface
Procedures often refer to information that appears on the 60 Series display as well as
the keystrokes required to perform a certain function.
Display information
Display information may also appear within chapter text, such as the message Need
Code or Mot'n Delay .
Keystrokes
Keystrokes listed within chapter text may also appear in brackets (i.e. [PRINT] or [CLR]
+ [SELECT] ).
1.1.3 Special messages
Examples of special messages you will see in this manual are defined below. The
signal words have specific meanings to alert you to additional information or the relative
level of hazard.
DANGER!
THIS IS A DANGER SYMBOL.
DANGER MEANS THAT FAILURE TO FOLLOW SPECIFIC PRACTICES
OR PROCEDURES WILL CAUSE INJURY OR DEATH.