Avery Weigh-Tronix GSE 460, User Instructions, Page: 35 / 48

60 Series User Instructions 33
2. Once in an accumulation mode, press [UNITS] + [SELECT] on the Model 460
or [.] [ENTER] on all other 60 Series indicators to add the displayed value to
the accumulated total.
Accumulate operations are motion delayed. If motion is occurring when
an accumulation is requested, the Mot'n Delay prompt is displayed until
motion ceases. If motion does not stop, press [CLR] to abort the
accumulation.
There are six accumulation modes with corresponding mode numbers
as shown in
Table 3.1 . When an accumulation is made, both the gross
and net totals are affected. After an accumulation occurs, these values
are frozen at their new accumulate total values until the gross weight
returns to zero. The weight must return to zero before another
accumulation is allowed. At that time, these values again resume their
active state. This feature prevents double accumulations. A
CLEAR
WGHT prompt appears to warn of such situations.
3.3.2 Initializing Accumulation Totals
The accumulation registers may be reset to a new number. This would permit you to
enter a total from the previous day or shift to continue the accumulation, or to reset the
number to "0".
1. Access the accumulation mode by keying in the single or two-digit mode
number from
Table 3.1 and press [SELECT] (not available on the Model 460).
2. The [ZERO] + [ENTER] keys on the Model 460 or the [CLR] key on all other 60
Series may be used to reset both the net and gross totals to zero.
3. The prompt CLEAR ACS? will appear briefly followed by ENTER =CLR! . Press
[ENTER] to complete the clearing or press any other key to abort the clear
operation.
3.3.3 Accumulation Modes
Table 3.1 Accumulation Modes
3.4 Absolute and Percent Checkweighing
The standard check-weigh operation is designed to check the weight of an item against
a given standard or target weight. In the check weigh absolute mode, values are
entered as target limits. In the check weigh percent mode, the values are entered
based on a percentage. Both checkweighing methods are available on all indicator
models.
Mode Number Description
3 Gross Total (GrTOT)
6 Net Total (GrTOT)
9 Accumulation Counter (# Accum)
31 Quantity Total (QtTOT)