Model 915A Indicator User Manual
9
6 Indicator Operation
6.1 Gross Weighing
1.
Power up the indicator by pressing
ON
.
Indicator powers up in mode that was active prior to turning off.
2.
Verify the scale is empty and zero the scale by pressing
ZERO
.
0
is displayed. Zeroing can only occur if there is no motion on the scale.
3.
Place weight on the scale.
Gross weight is displayed.
6.2 ID Number Entry
You may enter an 8 digit numerical ID number to be included in the printouts.
1.
From the gross weighing mode use the keypad and enter the ID number.
ID number is shown on the display.
2.
Press
ID
.
The
ID
annunciator is turned on. ID number is displayed for 2 seconds,
then returns to the gross mode.
6.2.1 View Current ID
If no ID is currently programmed, then
ID
key displays “no Id” for 2 sec., and returns to
the Gross mode.
1.
Press
ID
.
Current ID is shown for two seconds and then returns to the gross mode.
6.2.2 Clear Current ID
1.
Press
ID
to display current ID.
Current ID is displayed.
2.
Press
ZERO/CLEAR
while ID is displayed.
ID is cleared, and returns to gross mode.
