![background image](http://html1.mh-extra.com/html/avery-dennison/alx-720/alx-720_service-manual_3030524033.webp)
Service manual
ALX 720
Release 11/2003
Page 33
Step What is wrong
What could be the
reason
How to check it
Action to solve
problem
4c
Defective output
driver UDN2983
Replace output
driver U3 and U4
from socket (Figure
1)
If message
disappears, use only
one driver if the
other one is not in
use
Check external
connection for
reason for short
circuit
4d
Board
failure
Measure
output
voltage terminal 28
against terminal 14
Voltage has to be
22V – 26V.
If not ok, replace
board
4e Error
message
“E_10”
Voltage regulator
defective by over
voltage.
Measure input
voltage of board.
If >28V~ see
troubleshooting
transformer.
4f
Output voltage too
high.
Measure output
voltage terminal 28
against terminal 14.
Voltage has to be
22V – 26V.
If not ok, replace
board.
5a Error
message
“E__5”
Label sensor supply
10V not ok
Disconnect label
sensor
If message
disappears check
sensor and cable
Replace label sensor
5b
Measure voltage on
pin 1 against 5
If voltage <10V
replace board
5c Error
message
“E__9”
Fault 10V regulator
Measure voltage on
pin 1 against 5
If voltage >15V
replace board
6 Error
message
“E__9”
Motor driver fault
Check
connection
cable
See trouble shooting
motor
Summary of Contents for ALX 720
