Operators Manual
ALS 230
Release 12/07
Page 24
Operation
left hand version
right hand version
Figure 7 Threading diagram
y
Hang document material in reel holder in a way to ensure unwinding that label in the printer
section is on the top. Put outer guide disk onto mandrel. The two guide plates keep the label
roll reliably in position on the unwind mandrel.
y
Guide material around the dancer arm.
y
Labels behind the dispensing edge should be removed. The material brush has to be
positioned in a way, that the material is kept tight. From time to time, it is recommended to
reverse the mounting of the brush while you are loading a new label roll.
y
Adjust the pressure roller before the rewind, so that it is right in the middle of the material.
Close the pressure roll and turn the roll 2 or 3 times, so that the material is threaded. Check
that the material is guided straight.
y
Check correct position of the label sensor.
4.3
Initializing new label material
The machine requires data of the label material in use i.e. label length and opacity of the label
and backing material. In most cases, those parameters can be scanned during automatic
initialisation. This is not always possible.
During initialisation, the machine uses its label sensor to determine where the labels are on the
label web and the distance between the leading edge of labels (the label pitch) so that they can
be positioned correctly.
There are several modes of initialisation:
y
Automatic mode: The machine measure the setting
y
Manual mode: The operator measures the label parameter and keys in the values.
In most cases, initialisation should be executed in fully automatic mode. For fully automatic
initialisation, the "LPIT" and "CONT" parameters should be set to "AUTO". Initialisation can be
Summary of Contents for ALS 230
