98
6.3 S
AVING
/
LOADING
A
CONFIGURATION
ALS
20X
256
6.3.3
Loading from memory card
Selecting a file from a memory card
Press the
+
keys simultaneously.
– Display:
Files with the following endings can be selected:
– “*.FOR” (configuration file) or
– “*.S3B” (firmware file).
The files must be located on the compact flash card, in
the “\FORMATS” directory.
If there is more than one file in the “\FORMATS” direc-
tory, the first file alphabetically is displayed. The follow-
ing system is used to select a file:
[102] Functions of buttons for file selection
Once a file has been selected, it is executed. If a con-
figuration file was selected, the configuration is loaded.
For a firmware file, the firmware starts loading.
If there are no suitable files in the “\FORMATS” directo-
ry or no memory card in the card slot, the following
message appears:
Loading procedure
Select file as described above.
Press the
key.
– Display:
(Top line = selected file name)
The loading can take a couple of seconds. To
visualize the progress, the point is moving during
the loading.
The configuration is loaded after the restart.
6.3.4
Automatic loading
Save the configuration file as \AUTOSETUP.FOR
(in the memory card root directory)
Importing the settings:
Switch labeller off
Insert memory card
Switch labeller on
The import of the function settings starts automatically.
Display after settings have successfully been applied:
Switch labeller off
Remove memory card
Select file
SETUPALL.FOR
Key
Action
Show next file
Show previous file
Show first file
Select currently displayed file
Standalone
No files!
SETUP ALS 206 RH A637
Executing .
Store parameters
Restart system..
Switch off
Remove card
Summary of Contents for ALS 204
Page 1: ...ALS 204 206 256 SERVICE INSTALLATION MANUAL Labeller Edition 8 3 2012 Original version ...
Page 2: ......
Page 223: ......
