20
2.2 U
NPACKING
,
ASSEMBLING
AND
CONNECTING
THE
MACHINE
ALS
104
2.2.5
Connecting to the mains
power supply
WARNING!
The machine is connected with the mains
supply! Contact with energised components
can result in life-endangering currents
through the body as well as burns.
Ensure that the machine is switched off
before connecting power cable.
Only operate the machine at the mains
voltage rating set at the fuse holder.
(ALS 104) Ensure that the machine is cor-
rectly adjusted to your local supply volt-
age.
Only plug machine in to a correctly in-
stalled socket with an earth contact.
The length of the power cable must not
exceed 3m.
Only
by disconnecting the plug from the
mains supply is the machine
fully
discon-
nected from the supply. Therefore:
Keep mains connection freely accessible.
(ALS 104 with splash guard) Provide a
separate mains power separator.
In case of danger switch off the machine
and unplug the power cable.
[19] Power supply connection (A) at the ALS 104.
A
Summary of Contents for ALS 104
Page 1: ...ALS 104 INSTALLATION MANUAL Labeller Release no 1 4 2013...
Page 2: ......
Page 35: ......