16
Resetting the Camera
If it is necessary to reset the camera to the factory default settings, hold
down the Reset button (see
Camera Overview
) for 30 seconds. This will
return all settings, including network setup, to the factory default. The IP
address of the camera will return to 192.168.0.250.
MicroSD Card
Your camera includes a microSD card clot (up to 128GB), which can be
used for emergency video backup. The microSD card is not included.
You must remove the cover of the camera to access the microSD card
slot.
Instructions for recording to a microSD card slot can be found at
avertx.com/support.
Focusing the Camera Lens
AvertX cameras are focused at the factory for optimal imaging.
However, there are some situations where you may need to adjust the
focus. Follow the below instructions to focus the camera:
1. Remove the dome cover from the camera by unscrewing and
removing the screws on the outside of the dome.
2. Remove the rubber gasket surrounding the lens.
3. Twist the textured ring at the base of the lens to focus the camera.
You may need a pair of needle-nose pliers to grip the ring.
4. Replace the rubber basket
5. Replace the dome cover on the camera and secure screws.
Focus ring
microSD slot
