37084AA
50
Set the Arming Schedule for Motion Detection
To configure the motion detection schedule:
1. Click on the time bar and drag the mouse to select the time period.
Note:
Click on the selected time period, you can adjust the time period to the desired time by either
moving the time bar or input the exact time period.
•
(Optional) Click
Delete
to delete the current arming schedule.
2. Move the mouse to the end of each day, a copy dialogue box pops up, and you can copy the
current settings to other days.
3. Click
Save
to save the settings.
Note:
The time of each period can’t be overlapped. 8 periods can be configured for each day.
Set the Linkage Method for Motion Detection
Note:
This camera model does not support email or surveillance center notification.
To configure Linkage Method for Motion Detection:
•
Check
Upload to Memory Card/NAS
to capture images and/or record video when
motion is detected and upload the output to the on-board storage.
o
Requires microSD card installed in camera. (Not Included)
Note:
Refer to Storage > Schedule Settings & Storage > Storage Management sections of this
manual to configure microSD card storage.
