avertX HD438 User Manual Download Page 44

Page: 44 / 51

37080AA

Event

Motion Detection

Motion detection detects moving objects in the defined areas. In order to detect the moving objects

accurately and reduce the false alarm rate,

normal configuration

and

expert configuration

are

available for varied motion detection environments.

To configure Normal motion detection:

1. Check

Enable Motion Detection

2. Check

Enable Dynamic Analysis for Motion

if you want to mark the detected objects with green

rectangles.

3. Click

Draw Area

4. Click and drag the mouse on the live video to draw a motion detection area.

5. Click

Stop Drawing

to finish drawing one area.

•

(Optional) Click

Clear All

to clear all detection areas.

•

(Optional) Move the slider or type a number in the text box to set the detection

sensitivity

level.

0 – no detection; 100 – Maximum sensitivity

6. Click

Save

Expert motion detection

Expert motion detection is primarily used to configure the sensitivity and proportion of object on each area

for different day/night switch.

1. Draw the detection area.

2. Select OFF for

Scheduled Image Settings

Summary of Contents for HD438




















































Search results

Summary of Contents for HD438

Reviews:

Related manuals for HD438

Brands by name

Popular brands

avertX HD438, User Manual

Search results

Summary of Contents for HD438

Reviews:

Related manuals for HD438

Brands by name

Popular brands