Avermedia TVBOX 11, User Manual

Page: 15 / 44

User’s Manual
ENG-9
Eng
lish
Espa
ño
l
Franç
ais
4. Use CH ▲ or CH ▼ buttons to highlight a closed caption service and press Vol ► /OK . Or select “Off” to
disable the analog or digital closed caption.
4.3.3 Viewing PIP
PIP feature can display the main signal and auxiliary input signal simultaneously so that you can watch TV and work
on your PC at the same time.
Press the
PIP button on the remote control to switch between PIP, transparent PIP and full screen mode.
4.3.4 Changing the Size of the PIP Window
1. Press the MENU button to display the menu.
2. Press the
CH ▲
or
CH ▼
to select the “Setup” menu
and press Vol ► /OK .
3. Press the CH ▲ or CH ▼ to select the “PIP Size” and
press
Vol ► /OK
.
4. Use CH ▲ or CH ▼ buttons to highlight the desired PIP
window display size. The system provides “1/4”
、
”1/9”
and “1/16” for your selection. For instance, when you
choose 1/4 PIP mode, the system displays a 1/4 small screen
on the main screen.
5. Press Vol ► /OK button to save the change.
4.3.5 Changing the Resolution
In the Resolution menu, you can change the video output resolution.
1.
Press the MENU button to display the menu.
2. Press the
CH ▲
or
CH ▼
to select the “Setup” menu and press
Vol ► /OK
.
3. Press the CH ▲ or CH ▼ to select the “Resolution” and press Vol ► /OK .
4. Use CH ▲ or CH ▼ buttons to change the resolution.
5. Press
Vol ► /OK
button to save the change.
4.3.6 Changing the Menu Transparency
1. Press the MENU button to display the menu.
2. Press the CH ▲ or CH ▼ to select the “Setup” menu and press Vol ► /OK .
3. Use CH ▲ or CH ▼ buttons to highlight the “Menu Transparency” .
4. Press Vol ◄ or Vol ► on the remote to adjust percentage of the ON-Screen-Display’s transparency.
4.3.7 Component Output
Under Digital TV signal, you can switch the video output
resolution between 480i, 720p or 1080i. Please be noted that
720p and 1080i resolution are only supported by YPbPr video
output mode.
1.
Press the MENU button to display the menu.
2. Press the CH ▲ or CH ▼ to select the “Setup” menu
and press Vol ► /OK .