78
5.5 Schedule
Setting
Schedule to record, backup, enable network, reboot and disable alarm of all the cameras
either weekly or one time. The number from 00 to 23 represent the time in 24-hour clock. The
left most column display the days in a week.
To Set the Schedule Setting:
1. Select the date in the calendar. Use
and
buttons to shift the calendar to the left
or right.
2. Select the condition you want to schedule in the drop down list.
-
Record
Activate all the cameras to start video recording at the set time based on the
Recording setting (see also
-
Backup
Save another copy of all the data at the set time and specified backup path. NV DVR
automatically updates and only backup the data that are not yet included in the
archive. To assign backup path, click
.
i
Make sure the backup folder and storage folder are not on the same drive.
-
Enable Network
Activate NV DVR remote system to access at the set time. After the appointed time,
the Network function will be disabled. If the Network function is already enabled, the
Network function will not be disabled when the appointed time has ended.
-
Reboot
Restart the PC at the appointed time.
i
Make sure the Windows operating system is set
NOT
to require you to login user
name and password. This way the system will be able to run NV DVR program.
-
Disable Alarm
Deactivate the alarm at the set time temporarily.
-
Turn on Relay #
Active the Relay at the set time. If there are no Relays are connected, Turn on Relay #
function will not display in drag down list. The Relay number will depend on how many
Relays are connected.
3. Specify to either schedule it weekly or one time. Click
~
to make a selection.
4. Click on the blocks to set the schedule (see also
). Or click
All
to select all.
To store the setting, click
Save
. To remove the settings, click
Clear
.
5. To end Schedule Setting, click
OK
to exit and accept the setting and
Cancel
to exit without
saving the setting.
