Avermedia HomeFree AVplus F210, Quick Manual

Page: 28 / 84

Quick Installation Guide
ENG-23

Method 2: Enter the Static IP values if you already have an IP address set up before .
1. Open HomeFree Setup Tool and click
Network Config. tab.
2. Check Static IP .
3. Enter the values of your IP address as shown
in the illustration below* and click
Apply to
confirm.
IP : 192 · 168 · 1 · 32
Netmask : 255 · 255 · 255 · 0
Gateway : 192 · 168 · 1 · 1
(Please note the values may vary depending on your
network environment.)
*If you are setting up the second AVerMedia HomeFree
Combo , enter the IP values of the second device as
192 · 168 · 1 · 31
4.
Go to Windows Start

Control Panel

Network Connections

Local Area
Connection .
5. Double-click on the
Local Area Connection
icon (the main network connection you
are using).
6. Select Properties .
7. Double-click on the
Internet Protocol
(TCP/IP) .
8. Select Use the following IP address , enter
the values below* and click OK to confirm.
IP address : 192 · 168 · 1 · 33
Subnet mask : 255 · 255 · 255 · 0
Default gateway : 192 · 168 · 1 · 1