English-9
Step 4
Connecting the Capture Box to Your TV Using Composite Audio Cable
Connect one end of the composite audio cable to the
AUDIO OUT
port on the rear of the device and
the other end to the
AUDIO IN (colored white and red)
port on your TV.
Step 5
Connecting the Capture Box to Your STB Using IR Blaster Cable
Use a soft cloth to gently clean and remove the dust on the infrared (IR) sensor of your STB.
Connect the IR Blaster cable to the IR BLASTER port on the rear of the device. Make sure you snap the
cable securely in place
.
Then stick the IR emitter with double sided tape right to the STB IR sensor
window. To make sure it is properly attached, use your thumb to secure the emitter with a little pressure
for at least 3 seconds.
