Avermedia AW313, Quick Manual

Page: 25 / 76

3
1 Microphone
2 Lanyard Hole
3 Battery LED
4 USB Power Port
5 Mic Input
6 Clip
7 Charging Station Connector
8 Power LED
9 Power Button
10 Volume Up Button
11 Volume Down Button
Installation
Note: (i) To avoid excessive sound on initial sound test, lower your speaker
system volume first. (ii) Fully charge your microphone before first use.
Connect the receiver to a power outlet. 1.
Connect the receiver to a Line Input on a speaker system then 2 .
press the Power Button.
Turn on the microphone and start using.*
3.
1 2
LINE IN
3
POWER
VOL
* If both Power LEDs continue to flash, re-synchronize the microphone
and receiver by pressing the microphone's Power Button for 3 seconds
and waiting until the Power LED turns solid.
EN