DHCP:
Assign the IP address by local DHCP server to DVR system.
PPPOE:
Point-to-Point Protocol over Ethernet is a network protocol for encapsulating PPP
frames in Ethernet frames. It is used mainly with ADSL services. If your network is using ADSL
service connecting to internet, and then, select PPPOE mode. Enter
User ID
and
password
that is given by your ISP for PPPOE connecting authority.
DDNS:
DDNS(Dynamic Domain Name Service) is a data query service mainly used on the
Internet for translating domain names into Internet addresses. Users can register their own
domain name on
http://ddns.avers.com.tw
. (See
-
Domain Name
Enter the domain name that user has registered.
-
Password
A password use to access DDNS that user has setup when register the domain name
(4) Remote Upgrade Configuration
A port is using for the remote firmware upgrade through network.
(5) WebViewer Configuration
Activate
Enable Anonymous Login
to remotely access the DVR server without the need of
password
(6) Network Time Synchronization
Adjust the DVR system time same as network time server. Fill in the
Time Server
IP address or
domain name and select the
Time Zone
. User can enable
Automatic Synchronize
at
to set
automatic synchronize time on a daily basis. Or, user can click
Synchronize Time Right Now
to
adjust time right away.
3.5 Backup
Setup
In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The
numbers from 01 to 08 represent the camera number. When you back up the file, you may find
Qplayer application included in the backup folder. User need to execute the Qplayer installation on
PC for playback.(see also
1. Select the date of the recorded file in the calendar you want to backup. Use
and
buttons
28
