3
2 Keypad Function
2.1 Ch1/Ch5,Ch2/Ch6,Ch3/Ch7,Ch4/Ch8
Press the respective button (CH1/CH5, CH2/CH6, CH3/CH7 or
CH8) to display the channel in FULL display mode.
2.2 Auto
Press the AUTO (**S) button to sequentially display the turned-on
video channels (CH1/CH5, CH2/CH6, CH3/CH7, CH4/CH8 and
QUAD if turned ON in the Auto sequence setup mode) in the
display window.
2.3 QUAD
Press the QUAD (**S) button to enter QUAD display mode.
2.4 ZOOM
In the full screen display mode, to press the “ZOOM” (*L) button
will enter ZOOM in setup mode. The user can use the “up”, “down”,
“left” and “right“ buttons to move the ZOOM-in frame. To press the
“ZOOM” (**S) button will zoom in two times the selected area.
Users can press buttons “up”, “down”, “left” or “right“ to locate the
ZOOM-in frame in the Zoom-in mode its results in a panning-like
effect on the display window. Press the button “ZOOM” (**S) again
will return to the previous display mode. In the Zoom in setup
mode, to press the “ZOOM” (**L) button the display will return to
QUAD mode.
2.5 PIP
Press button “PIP” (*L) to enter PIP setup mode. By default, the
main window is set on channel 1 and sub-window on channel 2.
While, the main window is flashing, the user can press the “up” or
“down” button to select the video channel for main window. Then
press the “PIP” (**S) button to select the video channel for
sub-window. After selecting the video channel for sub-window and
pressing the “PIP” (**S) button again, the sub-window will stop
