AVERATEC N1000 Series User Manual Download Page 57

Page: 57 / 62

4-6

BIOS Setup

Advanced menu

✓

Intel(R) SpeedStep(tm) tech. (Translation)

This item allows you to enable or disable Intel SpeedStep technology. When

set to Disabled, the system always operates in a conserve power mode (the

processor works at FSB400-600MHz or FSB533-800MHz). If you want

optimize the processor, set this item to Enabled, so that the processor’s

speed will be controlled by the use of your operating system and

applications. Setting options: Enabled, and Disabled.

✓

AHCI Mode (Advanced Host Controller Interface)

Use this item to enable or disable the AHCI Mode. Setting options:

Disabled and Enabled. The default setting is Disabled.

✓

Legacy USB Support (Translation)

Selecting Enabled allows users to use USB devices, such as mouse,

keyboard, or portable disk, in DOS system; or allows users to boot the

system by USB device. Setting options: Enabled, Disabled and Auto.

Summary of Contents for N1000 Series































































Search results

Summary of Contents for N1000 Series

Reviews:

Brands by name

Popular brands

AVERATEC N1000 Series, User Manual

Search results

Summary of Contents for N1000 Series

Reviews:

Brands by name

Popular brands