manualshive.com logo in svg

AVERATEC 5400 Series, User Manual

Share
Download
AVERATEC 5400 Series User Manual Download Page 85

Caring for Your Notebook

 

7

 

91 

 

• 

While unplugging the power cord, disconnect it by the plug head, not by 
its wire. 

• 

Make sure the socket and any extension cords you may use can support 
the total current load of all the connected devices. 

• 

Though your AC adapter is suitable for universal international voltage, it 
still requires a stable power source. Make sure the voltage of the power 
source is stable. If you are unsure of your local power specifications, 
consult your local power company. 

• 

Place the power cord in such a way that people do not step on it.  Do not 
place anything over the power cord. 

• 

All cautions and warnings on the notebook computer should be noted. 

• 

If the notebook computer is not in use for a long time, disconnect it from 
the power outlet to avoid possible damage by transient over-voltage. 

• 

Never pour any liquid into openings or any part of your notebook as this 
may cause fire, electrical shock and damage to your notebook. 

• 

Never open the body of your notebook computer. For safety reason, this 
notebook computer should only be opened by qualified service personnel. 

• 

If one of the following situations arise, have the notebook computer 
checked by service personnel: 

➟ 

The power cord or plug is damaged. 

➟ 

Liquid has penetrated into the notebook computer. 

➟ 

The notebook computer has been exposed to moisture. 

➟ 

The notebook computer has not worked well or it does not work 
according to user’s manual. 

➟ 

The notebook computer was dropped and damaged. 

Summary of Contents for 5400 Series






























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands