Setup IP Address
There are two ways to setup IP address of the camera. Please follow the steps below to setup the IP
address.
Static IP Address
1.
After starting-up, press
button on remote control to call setup menu.
2.
Use
▲
and
▼
buttons to select the
Camera
>
Static IP
>
IP
, then press
button to enter IP
address.
[Note]
If DHCP is on, please turn off DHCP before setup static IP address. Go to
Camera
>
DHCP
>
DHCP
>
Off
.
3.
To setup gateway and DNS, use
▲
and
▼
to select
“Gateway” or “DNS”. Then, press
button to
enter the value.
Dynamic IP Address
1.
After starting-up, press
button on remote control to call setup menu.
2.
Use
▲
and
▼
buttons to select the
Camera
>
DHCP
>
DHCP
>
On
, then press
button to get IP
address from local DHCP server.
Summary of Contents for Tracking Camera
Page 5: ......
