25
Preset Setting
Setup preset position and view preset position.
1. Select the
“Preset” tab in live view interface.
2. Use
,
,
, and
to adjust camera view position.
3. Enter preset position number (0~255) in
Save Preset
column and select
“
Save
” to save the
position.
4. To call the preset position, enter a preset number (0~255) in
Load Preset
column or select the
preset number (0~19) from
Quick Call
section.
5.
Video Freeze with Preset:
On/Off the screen view freeze function. When
“
Video Freeze with
Preset
” is on, during the preset operation, the screen will freeze until the operation is done.
Tracking Control
Enable/disable tracking function, select tracking mode, and operate one-click tracking function.
◼
Tracking mode(Tracking mode setup refer to
Tracking Settings
section)
➢
Presenter:
Camera will start tracking when subject enters the tracking point (preset point) and
the face of the subject is detected.
➢
Zone:
Camera will start tracking when subject is moving between the preset tracking block
area.