7
M o u n t i n g t h e I P C a m e r a
1. Use the supplied 2 sun shield bolts and
secure the sun shield on the IP camera.
2. Place the sticker on the wall surface.
Then spot the mark and drill the 4 holes
indicated on the sticker.
It’s not necessary to drill the biggest
hole if you are going to run the wire on
the side.
3. Insert the 3 plastic anchors in the wall.
Place the washer on the 3 screws and
secure the mounting bracket on the
wall.
4. Hook the IP Camera and use the
hex
socket cap bolt to secure the IP camera on
the mount bracket.
5. After adjusting the focus and zoom
control, use the
torx pin head bolt to
secure the IP camera from being tampered.
