AVer PTC310, User Manual

Page: 39 / 86

32
Setup NDI Function
NDI service only support on NDI models: PTC310N, PTC310UN,
PTC310HN, PTC330N.
1. Enable NDI mode by selecting “
NDI
” as video mode in Video & Audio page. To disable the NDI
function, select other mode. The camera will reboot after selecting NDI mode.
2. User can setup the following functions:

Stream Video Output: Select video output resolution.

Framerate: Select framerate of the camera.

Encoding Type: Select encoding type – H.264 or H.265 .

Sampling Rate: Select sampling rate value.

Audio Input Type: select audio input type – Line In or MIC In .

Bitrate: Select bitrate value – 521kbps , 1Mbps , 2Mbps , 4Mbps , 8Mbps , 16Mbps , 32Mbps .

I-VOP interval(S): Move scroll bra to set the value – 1s to 10s .

Audio Volume : Move scroll bra to set the volume value – 0 to 10 .

Rate control: select the rate control type – VBR or CBR .