10
Set Up the Camera
You can configure the camera settings using the OSD menu or the Web interface of the camera.
OSD Menu
To access the OSD menu, connect the camera to a monitor or TV using the HDMI cable, and then you
can use the supplied Remote Control to operate the OSD Menu.
Press the
Menu button on the remote control to bring-up the OSD menu and use
▲
,
▼
,
,
to
select among pages or options, and press
to confirm settings.
IP Address Setup
Static IP
1. Press the Menu button on the remote control to bring-up the OSD menu.
2. Go to
Network
>
Static IP
.
[Note]
Turn the
DHCP
off before setting up static IP (
Network
>
DHCP
>
OFF
).
3. Select the
IP Address
,
Gateway
,
Netmask
, and
DNS
to configure. Press
and use the
Number Buttons to enter the value.