
29
System > General > Date & Time
In the “Date & Time” tab, the administrator can set and update the system’s date and time. After filling
in the correct settings, click Apply to apply the new settings.
Name
Function
(1) Synchronization Mode
Select the date & time settings method.
Manual – Manually set the date and time.
Sync with NTP Server – Obtain the date and time setting from
NTP server. Key in the NTP server name.
Sync from PC – Obtain the date and time setting on the current
login computer.
(2) Date & Time manual
setting
When choosing “Manual” time setting, please set the date and
time here.
(3) NTP Server
When choosing “NTP” time setting, please set the date here.
Time Zone: To select the time zone where the unit is located.
NTP Server: To state the address of NTP server to synchronize
date and time with the unit when If “NTP” is selected in the
Synchronization Mode.
Time Adjustment Period: To select the interval to calibrate the
time of the unit.
Save &Test: To save and test NTP server settings
(4) Daylight saving
Check the ON/OFF box to enable or disable Daylight Saving to
enable and setup the start date and end date for daylight saving
Summary of Contents for FD2000
