13
Finding IP Camera by using
“AVer IPCam Utility”
1.
Use the software, “
AVer IPCam Utility
” to assign the IP address of the IP camera. The software is
in the attached software CD.
2. Run the IPCam Utility
3. Select the proper network adapter and click [Search] to begin searching.
4. Select and double click the IP camera you want to access. If you want to change the settings of the
selected IP camera, enter the user ID, correct password, and change the settings and then click
Apply
button. This will change the setting and rescan the network again.
Summary of Contents for FB2026
