AVer User Guide v.2.1
www.TieNational.com
Tie National, LLC
4
Initial login will require first making a selection from the Remote
Server under Setup, clicking on OK, and then signing into the unit
via Network.
1. Storage Path
- Sets where data is saved. If there is not enough
free space to record the data the system will automatically save
over the oldest data. If you have more than one storage path
entered, the system will automatically save data to the next path
shown. By default data is stored in C:\RemoteData.
Enable network storage sends recorded video to an internet
storage drive/folder that has been mapped as a Network Driver
within the DVR server. This will be programmed by a TIE Engineer
if required.
2. Language
- Adjusts the language used for tool tips and dialogs.
Default is set to English.
3. Remote Server
- Available DVR servers for viewing. If viewing
from within the location, the IP Address shown will be an internal
address. If viewing remotely, an external IP must be added.
•
Click Add/Delete to update the available list view with
additional IP addresses.
•
To view a selected site, highlight the IP to view from the list
and click OK.
Contact TIE’s Help Desk at 630.301.7444 for assistance in determining
your IP address and port number.
4. Channel Settings
- Identifies the cameras that are transmitting
signals to the server and which cameras can be viewed from the
Remote Console. Default for both is set to all.
Setup
Initial login will require first making a selection from the Remote
Server under Setup, clicking on OK, and then signing into the unit via
Network.
•
The following User ID and Passwords have been setup by default on
your system. After entering, click OK and you will be connected to Live
view.
Network (Login)
ADMINISTRATOR
(playback and recording
authorization)
ID: owner
Password: 1234
USER
(view only access)
ID: user
Password: 1234
Please note that TIE encourages that you change your passwords (see Password Reset) and keep them stored in a
secure location. TIE does not have access to your passwords.
