5.
Input Source Selection:
The AVer CP supports a variety of input sources. Follow the steps below to select the different input sources.
1. Press
Source
on the remote control or press
Source
on the control panel of the interactive panel. Also,
you can press
on the main screen to call out the input source page.
2. From the source page, use the ▲, ▼, ◄ or ► button on the remote control to select or use your finger
to select directly on the screen.
6.
Annotation:
On the main screen, select
(Whiteboard mode) to switch to Whiteboard mode. In Whiteboard mode,
select
or
to draw, write, and highlight on the screen.
OPS Installation
1. Insert the OPS into the special slot on the rear of the interactive panel.
2. Secure the OPS with screws and make sure the OPS is installed properly.
Wall Mount Installation
Dimension of the 4 bracket mounting holes
65”
75”/86”
800mm
400mm
Ventilation distance
Software, FAQ, Training Videos
Download The AVer Interactive software, check out frequently asked questions, training videos please go to:
http://averusa.com/classroom-technology/support/
.
For detailed warranty information, please visit our website
http://www.averusa.com
and select the country
where the unit is purchased.
600mm
400mm
200mm
200mm
200mm
100mm
100mm
