5
Function Buttons (continued)
(6)
W B
M ODE
WB AUT O
WB MODE button
For modifying
the camera’s white balance
mode. Press to toggle between the
available modes. The
VALUE/R
and
VALUE/B
knobs perform different functions
in different white balance modes (refer to
the table below). When the
WB MODE
button indicator is on, the
VALUE/R
and
Bright/B
knobs are only available for white
balance.
(7)
A E
MODE
AE AUTO
AE MODE button
For modifying the camera’s exposure
mode. Press to toggle between the
available modes. In exposure mode, use
VALUE/R
and
BRIGHT/B
knobs to adjust
the value.
When the
AE MODE
indicator is on, the
VALUE/R
and
BRIGHT/B
knobs adjust the
exposure parameters.
WB
MODE
VALUE/R
knob
function
BRIGHT/B
knob
function
Auto
None
None
Manual
Red Gain
Blue Gain
AE MODE VALUE/R
knob
BRIGHT/B
knob
Auto
None
Gain
compensation
Manual
Shutter
Iris
Shutter
priority
Shutter
Gain
compensation
Iris priority Iris
Gain
compensation
Brightness
priority
None
Brightness
(8)
Preset function buttons
-
PRESET
: Saves and calls presets.
Save Presets: Press the
PRESET
button and its light will start to flash.
Then, enter the preset number to
save the preset. For example, press
PRESET
+ 1 + 2 to set the preset as
12. Press
PRESET
again to
accomplish the setting.
Call Presets: Preset number
button(s) +
PRESET
. For example,
press 1 + 2 +
PRESET
to call preset
12.
-
RESET
: Clears the presets. Press the
RESET
button and the
RESET
light will
start to flash. Then, enter the preset
number. For example, press
RESET
+ 2
+ 5 to clear preset 25.
(9)
Camera function buttons
-
POWER
: Checks the camera power
status (
).
Press the
POWER
button, and the
CAM1
to
CAM7
button status lights will light up.
Green
Power on
White
Standby
Off
No camera is connected or
detected
Press
POWER
+
CAM (1
–7)
to turn the
camera on/off.
-
BACKLIGHT:
Turns the backlight on/off.
-
MENU:
Enters or exits the setup menu.
Press and hold for 3 seconds to enter the
setup menu.
-
PAN TILT RESET:
Resets the pan/tilt
position of camera.