www.avenview.com
8
1.8
RS232 Control
1.
Scan:
Push this button will trigger the automatic search over all the available COM ports (1-255). If
the matrix is detected, the “Successful Connected” message window will show up.
Otherwise, an error message “Com Port is not Available” shows up to indicate there is no legal device
found. Notice that successful connection is only established if there is at least one available COM
port.
2.
Open:
Open the COM port after scan to establish the connection between PC and the matrix.
3.
Close:
Release the COM port after scan.
4.
Quick Setup Buttons:
Provide the fast setup between inputs and outputs of the matrix. “Default”
button makes input 1, 2, 3, 4, 5 mapped to output 1, 2, 3, 4, 5 respectively. “Channel 1” makes all
outputs see input1. Same to the rest of the buttons.
5.
Output Channel Setup:
Click on this button, a quick selection table of inputs will show up. Users can
therefore easily select the input video for each output.
6.
Input Channel Setup:
The button will bring up the setup window for the inputs as below.
1
2
3
4
6
5
Summary of Contents for SW-VGA-5X5
Page 5: ...www avenview com 5...
Page 9: ...www avenview com 9...
